{"id":2011,"date":"2022-09-07T09:11:57","date_gmt":"2022-09-07T13:11:57","guid":{"rendered":"https:\/\/labeauairsol.ca\/sampling-procedures\/"},"modified":"2024-03-15T12:06:50","modified_gmt":"2024-03-15T16:06:50","slug":"sampling-procedures","status":"publish","type":"page","link":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/","title":{"rendered":"Sampling procedures"},"content":{"rendered":"\n<p class=\"has-medium-font-size wp-block-paragraph\">Here you will find the sampling procedure according to the type of sample to be taken:<\/p>\n\n<ul class=\"has-medium-font-size wp-block-list\"><li><strong><a href=\"#moisissure\">Mold (surface)<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/labeauairsol.ca\/wp-admin\/post.php?post=1489&amp;action=edit#ocre\">Iron ochre<\/a><\/strong><\/li><li><strong><a href=\"#amiante\">Asbestos and vermiculite<\/a><\/strong><\/li><\/ul>\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-8f761849 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:33.33%\">\n<h3 class=\"wp-block-heading\"><strong>MOLD (SURFACE)<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Surface sampling is used to confirm the presence of mold growth on a surface and to identify its type. This is done with clear, transparent adhesive tape.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Rate<\/strong> ? : $178.50<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:66.66%\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Ruban-2.png\" alt=\"\" class=\"wp-image-1540\" width=\"345\" height=\"250\" srcset=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Ruban-2.png 618w, https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Ruban-2-300x217.png 300w\" sizes=\"(max-width: 639px) 98vw, (max-width: 1199px) 64vw, 345px\" \/><\/figure>\n<\/div><\/div>\n<\/div>\n\n<p class=\"has-text-align-left wp-block-paragraph\"><strong>ATTENTION<\/strong><\/p>\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#fcb90082\"><strong>  It is very important not to touch the sticky part of the tape, or the sample is taken with the fingers throughout the operation, to avoid contamination.<\/strong><\/p>\n\n<div style=\"height:25px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n<figure class=\"wp-block-table is-style-regular\"><table><tbody><tr><td><strong>Equipment required<\/strong><br\/><br\/>Adhesive tape <strong>\n  <u>clear and transparent<\/u>\n<\/strong><br\/>Ziploc bag<br\/>Marker<br\/><\/td><\/tr><tr><td><strong>Sampling steps  <\/strong><br\/><br\/>1. Take a piece of tape and fold over the edge on one side to avoid contaminating the tape with your fingers.<br\/>2. Stick the sticky part of the tape to the desired sample surface and press with your hand to adhere the particles.<br\/>3. Slowly remove the tape from the surface<br\/>4. Stick the tape to the plastic inside the Ziploc bag.<br\/>5. If possible, mark the area to be analyzed on the ribbon and seal the bag.<br\/>6. Take a photo of the sampling area and attach it to the application. (Optional)<br\/>7. Complete and attach the following analysis request: <a href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Moisissure-et-demande.pdf\" target=\"_blank\" rel=\"noreferrer noopener\">HERE<\/a>. Your sample type is number 7: <em>Adhesive tape<\/em>.<br\/><\/td><\/tr><\/tbody><\/table><\/figure>\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button is-style-fill\"><a class=\"wp-block-button__link\" href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Moisissure-et-demande-1.pdf\" style=\"border-radius:0px\" target=\"_blank\" rel=\"noreferrer noopener\">Print procedure<\/a><\/div>\n<\/div>\n\n<div style=\"height:40px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n<p class=\"wp-block-paragraph\"><strong>Transport<\/strong> ?<\/p>\n\n<p class=\"wp-block-paragraph\">Transporting this type of sample does not require any special conditions, but it is very important that the samples do not freeze.  <\/p>\n\n<p class=\"wp-block-paragraph\">Send your sample to one of our <a href=\"#adresses\">drop-off points.<\/a><\/p>\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n<h3 class=\"wp-block-heading\" id=\"ocre\"><strong>FERROUS OCRE<\/strong><\/h3>\n\n<p class=\"wp-block-paragraph\">This analysis determines the presence or absence of ferrobacteria.  <\/p>\n\n<p class=\"wp-block-paragraph\"><strong>Rate<\/strong> ? : $168.00<\/p>\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-8f761849 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Bassin-de-captation.png\" alt=\"\" class=\"wp-image-1535\" width=\"250\" height=\"180\"\/><\/figure>\n<\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/depot-docre.png\" alt=\"\" class=\"wp-image-1536\" width=\"137\" height=\"183\" srcset=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/depot-docre.png 411w, https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/depot-docre-225x300.png 225w\" sizes=\"(max-width: 639px) 98vw, (max-width: 1199px) 64vw, 137px\" \/><\/figure>\n<\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Clapet.png\" alt=\"\" class=\"wp-image-1537\" width=\"250\" height=\"150\"\/><\/figure>\n<\/div><\/div>\n<\/div>\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><strong>Equipment required<\/strong><br\/><br\/>Clean, airtight container (e.g. Masson jar)<br\/><\/td><\/tr><tr><td><strong>Sampling steps  <\/strong><br\/><br\/>1. Using your clean container, remove any ochre deposits (ochre-coloured slime) from the catch basin or non-return valve. If few deposits are present, include water from the drain or retention basin.<br\/>2. Take a photo of the sampling site and attach it to the application. (Optional)<br\/>3) Complete and attach the following analysis request form to your sample: <a href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Ocre-et-demande.pdf\" target=\"_blank\" rel=\"noreferrer noopener\">HERE<\/a>. Your sample type is number 8: <em>Iron ochre<\/em>.<br\/><\/td><\/tr><\/tbody><\/table><\/figure>\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link\" href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Ocre-et-demande-1.pdf\" style=\"border-radius:0px\" target=\"_blank\" rel=\"noreferrer noopener\">Print procedure<\/a><\/div>\n<\/div>\n\n<div style=\"height:40px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n<p class=\"wp-block-paragraph\"><strong>Transport<\/strong> ?<\/p>\n\n<p class=\"wp-block-paragraph\">Transporting this type of sample does not require any special conditions, but please ensure that your container is well wrapped if you send it to us by post.  <\/p>\n\n<p class=\"wp-block-paragraph\">Send your sample to one of our <a href=\"#adresses\">drop-off points.<\/a><\/p>\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n<h3 class=\"wp-block-heading\" id=\"amiante\"><strong>ASBESTOS AND VERMICULITE<\/strong><\/h3>\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-8f761849 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:33.33%\">\n<p class=\"wp-block-paragraph\">This sampling is used to detect the presence of asbestos in different types of materials. The sampling method varies according to the type of material.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Asbestos<\/strong> <strong>rate<\/strong> ?: $105.00  <\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Vermiculite<\/strong> <strong>rate<\/strong> ?: $175.00<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:66.66%\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Sac-double.jpg\" alt=\"\" class=\"wp-image-1542\" width=\"345\" height=\"250\"\/><\/figure>\n<\/div><\/div>\n<\/div>\n\n<p class=\"wp-block-paragraph\"><strong>ATTENTION<\/strong><\/p>\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#fcb90082\"><strong>Tools, if used, should be cleaned in soapy water between samples to avoid cross-contamination. During sampling, it is important to minimize dust emissions as much as possible. In addition, it is important that samples are sent to the laboratory in lined, leakproof plastic bags (Ziploc type). The sample must contain portions taken from 3 different locations, e.g. in the attic, samples can be taken from the center, the left and the right. It&#8217;s important to include in the sample the vermiculite found completely underneath the layer of insulation to get the dust or small fragments, since asbestos fragments are often small and therefore tend to sink over time.<\/strong><\/p>\n\n<div style=\"height:40px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><strong>Equipment required<\/strong><br\/><br\/>Protective gloves (or hand wash after sampling)<br\/>Respirator (e.g. N95 or P100)<br\/>2 watertight Ziploc-type plastic bags<br\/><\/td><\/tr><tr><td><strong>Vermiculite sampling steps  <\/strong> <br\/><br\/>1. Make sure you are wearing the necessary protective gear.<br\/>2. Fill at least one 30cm (12&#8243;-style freezer-size) watertight plastic bag.<br\/>3. Secure the sample in another bag to double the protection. (View image)<br\/>4. Complete and attach the following analysis request form to your sample: <a href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2017\/02\/Demande-danalyse.pdf\">HERE<\/a>. Your sample type is number 9: <em>Asbestos &#8211; Bulk Materials (MLP<\/em>).<br\/><\/td><\/tr><tr><td><strong>Sampling steps for surface materials<\/strong><br\/><br\/>1. Make sure you have the necessary protection.<br\/>2. Remove a minimum of 5 cm x 5 cm (2&#8221;x2&#8221;) from the surface to be analyzed.<br\/>3. Secure the sample in another bag to double the protection. (View image)<br\/>4. Make sure you have removed all layers likely to contain asbestos.<br\/>5. Complete and attach the following analysis request form to your sample: <a href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Amiante-et-demande.pdf\" target=\"_blank\" rel=\"noreferrer noopener\">HERE<\/a>. Your sample type is number 9: <em>Asbestos &#8211; Bulk Materials (MLP<\/em>).<br\/><\/td><\/tr><\/tbody><\/table><\/figure>\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link\" href=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/09\/Procedure-Echantillon-Amiante-et-demande-1.pdf\" style=\"border-radius:0px\" target=\"_blank\" rel=\"noreferrer noopener\">Print procedure<\/a><\/div>\n<\/div>\n\n<div style=\"height:40px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n<p class=\"wp-block-paragraph\"><strong>Transport<\/strong> ?<\/p>\n\n<p class=\"wp-block-paragraph\">Transporting this type of sample requires no special conditions.<\/p>\n\n<p class=\"wp-block-paragraph\">Send your sample to one of our <a href=\"#adresses\">drop-off points.<\/a><\/p>\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n<h3 class=\"wp-block-heading\" id=\"adresses\"><strong>Our drop-off points<\/strong><\/h3>\n\n<p class=\"wp-block-paragraph\">Send us your samples and analysis request in person <strong>or<\/strong> by mail to one of the following drop-off points:<\/p>\n\n<p class=\"wp-block-paragraph\"><strong>Joliette<\/strong>: 84 rue de la Visitation Joliette, QC J6E 4M8<\/p>\n\n<p class=\"wp-block-paragraph\"><strong>Quebec City<\/strong>: 840 rue Raoul-Jobin, local 350, Quebec City, QC G1N 1S7<\/p>\n\n<p class=\"wp-block-paragraph\"><strong>Saint-J\u00e9r\u00f4me<\/strong>: 888 rue St-Georges, Saint-J\u00e9r\u00f4me, QC J7Z 5E5<\/p>\n\n<p class=\"wp-block-paragraph\"><strong>Mascouche<\/strong>: 1233 avenue Garden, Mascouche, QC J7L 0A2<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Here you will find the sampling procedure according to the type of sample to be taken: Mold (surface) Iron ochre Asbestos and vermiculite MOLD (SURFACE) Surface sampling is used to confirm the presence of mold growth on a surface and to identify its type. This is done with clear, transparent adhesive tape. Rate ? : $178.50 ATTENTION It is very important not to touch the sticky part of the tape, or the sample is taken with the fingers throughout the operation, to avoid contamination. Equipment required Adhesive tape clear and transparent Ziploc bagMarker Sampling steps 1. Take a piece of tape and fold over the edge on one side to avoid contaminating the tape with your fingers.2. Stick the sticky part of the tape to the desired sample surface and press with your hand to adhere the particles.3. Slowly remove the tape from the surface4. Stick the tape to the plastic inside the Ziploc bag.5. If possible, mark the area to be analyzed on the ribbon and seal the bag.6. Take a photo of the sampling area and attach it to the application. (Optional)7. Complete and attach the following analysis request: HERE. Your sample type is number 7: Adhesive tape. Transport ? Transporting this type of sample does not require any special conditions, but it is very important that the samples do not freeze. Send your sample to one of our drop-off points. FERROUS OCRE This analysis determines the presence or absence of ferrobacteria. Rate ? : $168.00 Equipment required Clean, airtight container (e.g. Masson jar) Sampling steps 1. Using your clean container, remove any ochre deposits (ochre-coloured slime) from the catch basin or non-return valve. If few deposits are present, include water from the drain or retention basin.2. Take a photo of the sampling site and attach it to the application. (Optional)3) Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 8: Iron ochre. Transport ? Transporting this type of sample does not require any special conditions, but please ensure that your container is well wrapped if you send it to us by post. Send your sample to one of our drop-off points. ASBESTOS AND VERMICULITE This sampling is used to detect the presence of asbestos in different types of materials. The sampling method varies according to the type of material. Asbestos rate ?: $105.00 Vermiculite rate ?: $175.00 ATTENTION Tools, if used, should be cleaned in soapy water between samples to avoid cross-contamination. During sampling, it is important to minimize dust emissions as much as possible. In addition, it is important that samples are sent to the laboratory in lined, leakproof plastic bags (Ziploc type). The sample must contain portions taken from 3 different locations, e.g. in the attic, samples can be taken from the center, the left and the right. It&#8217;s important to include in the sample the vermiculite found completely underneath the layer of insulation to get the dust or small fragments, since asbestos fragments are often small and therefore tend to sink over time. Equipment required Protective gloves (or hand wash after sampling)Respirator (e.g. N95 or P100)2 watertight Ziploc-type plastic bags Vermiculite sampling steps 1. Make sure you are wearing the necessary protective gear.2. Fill at least one 30cm (12&#8243;-style freezer-size) watertight plastic bag.3. Secure the sample in another bag to double the protection. (View image)4. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Sampling steps for surface materials 1. Make sure you have the necessary protection.2. Remove a minimum of 5 cm x 5 cm (2&#8221;x2&#8221;) from the surface to be analyzed.3. Secure the sample in another bag to double the protection. (View image)4. Make sure you have removed all layers likely to contain asbestos.5. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Transport ? Transporting this type of sample requires no special conditions. Send your sample to one of our drop-off points. Our drop-off points Send us your samples and analysis request in person or by mail to one of the following drop-off points: Joliette: 84 rue de la Visitation Joliette, QC J6E 4M8 Quebec City: 840 rue Raoul-Jobin, local 350, Quebec City, QC G1N 1S7 Saint-J\u00e9r\u00f4me: 888 rue St-Georges, Saint-J\u00e9r\u00f4me, QC J7Z 5E5 Mascouche: 1233 avenue Garden, Mascouche, QC J7L 0A2<\/p>\n","protected":false},"author":8,"featured_media":1911,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/page-avec-services.php","meta":{"_acf_changed":false,"_eb_attr":"","_uag_custom_page_level_css":"","footnotes":""},"class_list":["post-2011","page","type-page","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>LAB&#039;EAU-AIR-SOL - Sampling<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"LAB&#039;EAU-AIR-SOL - Sampling\" \/>\n<meta property=\"og:description\" content=\"Here you will find the sampling procedure according to the type of sample to be taken: Mold (surface) Iron ochre Asbestos and vermiculite MOLD (SURFACE) Surface sampling is used to confirm the presence of mold growth on a surface and to identify its type. This is done with clear, transparent adhesive tape. Rate ? : $178.50 ATTENTION It is very important not to touch the sticky part of the tape, or the sample is taken with the fingers throughout the operation, to avoid contamination. Equipment required Adhesive tape clear and transparent Ziploc bagMarker Sampling steps 1. Take a piece of tape and fold over the edge on one side to avoid contaminating the tape with your fingers.2. Stick the sticky part of the tape to the desired sample surface and press with your hand to adhere the particles.3. Slowly remove the tape from the surface4. Stick the tape to the plastic inside the Ziploc bag.5. If possible, mark the area to be analyzed on the ribbon and seal the bag.6. Take a photo of the sampling area and attach it to the application. (Optional)7. Complete and attach the following analysis request: HERE. Your sample type is number 7: Adhesive tape. Transport ? Transporting this type of sample does not require any special conditions, but it is very important that the samples do not freeze. Send your sample to one of our drop-off points. FERROUS OCRE This analysis determines the presence or absence of ferrobacteria. Rate ? : $168.00 Equipment required Clean, airtight container (e.g. Masson jar) Sampling steps 1. Using your clean container, remove any ochre deposits (ochre-coloured slime) from the catch basin or non-return valve. If few deposits are present, include water from the drain or retention basin.2. Take a photo of the sampling site and attach it to the application. (Optional)3) Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 8: Iron ochre. Transport ? Transporting this type of sample does not require any special conditions, but please ensure that your container is well wrapped if you send it to us by post. Send your sample to one of our drop-off points. ASBESTOS AND VERMICULITE This sampling is used to detect the presence of asbestos in different types of materials. The sampling method varies according to the type of material. Asbestos rate ?: $105.00 Vermiculite rate ?: $175.00 ATTENTION Tools, if used, should be cleaned in soapy water between samples to avoid cross-contamination. During sampling, it is important to minimize dust emissions as much as possible. In addition, it is important that samples are sent to the laboratory in lined, leakproof plastic bags (Ziploc type). The sample must contain portions taken from 3 different locations, e.g. in the attic, samples can be taken from the center, the left and the right. It&#8217;s important to include in the sample the vermiculite found completely underneath the layer of insulation to get the dust or small fragments, since asbestos fragments are often small and therefore tend to sink over time. Equipment required Protective gloves (or hand wash after sampling)Respirator (e.g. N95 or P100)2 watertight Ziploc-type plastic bags Vermiculite sampling steps 1. Make sure you are wearing the necessary protective gear.2. Fill at least one 30cm (12&#8243;-style freezer-size) watertight plastic bag.3. Secure the sample in another bag to double the protection. (View image)4. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Sampling steps for surface materials 1. Make sure you have the necessary protection.2. Remove a minimum of 5 cm x 5 cm (2&#8221;x2&#8221;) from the surface to be analyzed.3. Secure the sample in another bag to double the protection. (View image)4. Make sure you have removed all layers likely to contain asbestos.5. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Transport ? Transporting this type of sample requires no special conditions. Send your sample to one of our drop-off points. Our drop-off points Send us your samples and analysis request in person or by mail to one of the following drop-off points: Joliette: 84 rue de la Visitation Joliette, QC J6E 4M8 Quebec City: 840 rue Raoul-Jobin, local 350, Quebec City, QC G1N 1S7 Saint-J\u00e9r\u00f4me: 888 rue St-Georges, Saint-J\u00e9r\u00f4me, QC J7Z 5E5 Mascouche: 1233 avenue Garden, Mascouche, QC J7L 0A2\" \/>\n<meta property=\"og:url\" content=\"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/\" \/>\n<meta property=\"og:site_name\" content=\"Lab&#039;eau-air-sol\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/labeauairsol\/\" \/>\n<meta property=\"article:modified_time\" content=\"2024-03-15T16:06:50+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1400\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/\",\"url\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/\",\"name\":\"LAB'EAU-AIR-SOL - Sampling\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/labeauairsol.ca\\\/wp-content\\\/uploads\\\/2022\\\/07\\\/Bandeaux-.jpg\",\"datePublished\":\"2022-09-07T13:11:57+00:00\",\"dateModified\":\"2024-03-15T16:06:50+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/#primaryimage\",\"url\":\"https:\\\/\\\/labeauairsol.ca\\\/wp-content\\\/uploads\\\/2022\\\/07\\\/Bandeaux-.jpg\",\"contentUrl\":\"https:\\\/\\\/labeauairsol.ca\\\/wp-content\\\/uploads\\\/2022\\\/07\\\/Bandeaux-.jpg\",\"width\":1400,\"height\":600},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/sampling-procedures\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Sampling procedures\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/\",\"name\":\"Lab\u2019eau-air-sol\",\"description\":\"La science au service de votre environnement\",\"publisher\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#organization\",\"name\":\"Lab'eau-air-sol\",\"url\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/labeauairsol.ca\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/logo-lab-eau-air-sol.png\",\"contentUrl\":\"https:\\\/\\\/labeauairsol.ca\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/logo-lab-eau-air-sol.png\",\"width\":134,\"height\":133,\"caption\":\"Lab'eau-air-sol\"},\"image\":{\"@id\":\"https:\\\/\\\/labeauairsol.ca\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/labeauairsol\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"LAB'EAU-AIR-SOL - Sampling","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/","og_locale":"en_US","og_type":"article","og_title":"LAB'EAU-AIR-SOL - Sampling","og_description":"Here you will find the sampling procedure according to the type of sample to be taken: Mold (surface) Iron ochre Asbestos and vermiculite MOLD (SURFACE) Surface sampling is used to confirm the presence of mold growth on a surface and to identify its type. This is done with clear, transparent adhesive tape. Rate ? : $178.50 ATTENTION It is very important not to touch the sticky part of the tape, or the sample is taken with the fingers throughout the operation, to avoid contamination. Equipment required Adhesive tape clear and transparent Ziploc bagMarker Sampling steps 1. Take a piece of tape and fold over the edge on one side to avoid contaminating the tape with your fingers.2. Stick the sticky part of the tape to the desired sample surface and press with your hand to adhere the particles.3. Slowly remove the tape from the surface4. Stick the tape to the plastic inside the Ziploc bag.5. If possible, mark the area to be analyzed on the ribbon and seal the bag.6. Take a photo of the sampling area and attach it to the application. (Optional)7. Complete and attach the following analysis request: HERE. Your sample type is number 7: Adhesive tape. Transport ? Transporting this type of sample does not require any special conditions, but it is very important that the samples do not freeze. Send your sample to one of our drop-off points. FERROUS OCRE This analysis determines the presence or absence of ferrobacteria. Rate ? : $168.00 Equipment required Clean, airtight container (e.g. Masson jar) Sampling steps 1. Using your clean container, remove any ochre deposits (ochre-coloured slime) from the catch basin or non-return valve. If few deposits are present, include water from the drain or retention basin.2. Take a photo of the sampling site and attach it to the application. (Optional)3) Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 8: Iron ochre. Transport ? Transporting this type of sample does not require any special conditions, but please ensure that your container is well wrapped if you send it to us by post. Send your sample to one of our drop-off points. ASBESTOS AND VERMICULITE This sampling is used to detect the presence of asbestos in different types of materials. The sampling method varies according to the type of material. Asbestos rate ?: $105.00 Vermiculite rate ?: $175.00 ATTENTION Tools, if used, should be cleaned in soapy water between samples to avoid cross-contamination. During sampling, it is important to minimize dust emissions as much as possible. In addition, it is important that samples are sent to the laboratory in lined, leakproof plastic bags (Ziploc type). The sample must contain portions taken from 3 different locations, e.g. in the attic, samples can be taken from the center, the left and the right. It&#8217;s important to include in the sample the vermiculite found completely underneath the layer of insulation to get the dust or small fragments, since asbestos fragments are often small and therefore tend to sink over time. Equipment required Protective gloves (or hand wash after sampling)Respirator (e.g. N95 or P100)2 watertight Ziploc-type plastic bags Vermiculite sampling steps 1. Make sure you are wearing the necessary protective gear.2. Fill at least one 30cm (12&#8243;-style freezer-size) watertight plastic bag.3. Secure the sample in another bag to double the protection. (View image)4. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Sampling steps for surface materials 1. Make sure you have the necessary protection.2. Remove a minimum of 5 cm x 5 cm (2&#8221;x2&#8221;) from the surface to be analyzed.3. Secure the sample in another bag to double the protection. (View image)4. Make sure you have removed all layers likely to contain asbestos.5. Complete and attach the following analysis request form to your sample: HERE. Your sample type is number 9: Asbestos &#8211; Bulk Materials (MLP). Transport ? Transporting this type of sample requires no special conditions. Send your sample to one of our drop-off points. Our drop-off points Send us your samples and analysis request in person or by mail to one of the following drop-off points: Joliette: 84 rue de la Visitation Joliette, QC J6E 4M8 Quebec City: 840 rue Raoul-Jobin, local 350, Quebec City, QC G1N 1S7 Saint-J\u00e9r\u00f4me: 888 rue St-Georges, Saint-J\u00e9r\u00f4me, QC J7Z 5E5 Mascouche: 1233 avenue Garden, Mascouche, QC J7L 0A2","og_url":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/","og_site_name":"Lab&#039;eau-air-sol","article_publisher":"https:\/\/www.facebook.com\/labeauairsol\/","article_modified_time":"2024-03-15T16:06:50+00:00","og_image":[{"width":1400,"height":600,"url":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/","url":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/","name":"LAB'EAU-AIR-SOL - Sampling","isPartOf":{"@id":"https:\/\/labeauairsol.ca\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/#primaryimage"},"image":{"@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/#primaryimage"},"thumbnailUrl":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg","datePublished":"2022-09-07T13:11:57+00:00","dateModified":"2024-03-15T16:06:50+00:00","breadcrumb":{"@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/labeauairsol.ca\/en\/sampling-procedures\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/#primaryimage","url":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg","contentUrl":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg","width":1400,"height":600},{"@type":"BreadcrumbList","@id":"https:\/\/labeauairsol.ca\/en\/sampling-procedures\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/labeauairsol.ca\/en\/"},{"@type":"ListItem","position":2,"name":"Sampling procedures"}]},{"@type":"WebSite","@id":"https:\/\/labeauairsol.ca\/en\/#website","url":"https:\/\/labeauairsol.ca\/en\/","name":"Lab\u2019eau-air-sol","description":"La science au service de votre environnement","publisher":{"@id":"https:\/\/labeauairsol.ca\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/labeauairsol.ca\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/labeauairsol.ca\/en\/#organization","name":"Lab'eau-air-sol","url":"https:\/\/labeauairsol.ca\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/labeauairsol.ca\/en\/#\/schema\/logo\/image\/","url":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2018\/09\/logo-lab-eau-air-sol.png","contentUrl":"https:\/\/labeauairsol.ca\/wp-content\/uploads\/2018\/09\/logo-lab-eau-air-sol.png","width":134,"height":133,"caption":"Lab'eau-air-sol"},"image":{"@id":"https:\/\/labeauairsol.ca\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/labeauairsol\/"]}]}},"uagb_featured_image_src":{"full":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",1400,600,false],"thumbnail":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--150x150.jpg",150,150,true],"medium":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--300x129.jpg",300,129,true],"medium_large":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--768x329.jpg",768,329,true],"large":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1024x439.jpg",1024,439,true],"1536x1536":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",1400,600,false],"2048x2048":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",1400,600,false],"featured-small":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--640x200.jpg",640,200,true],"featured-medium":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1280x400.jpg",1280,400,true],"featured-large":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1400x400.jpg",1400,400,true],"featured-xlarge":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1400x400.jpg",1400,400,true],"fp-small":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--640x274.jpg",640,274,true],"fp-medium":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1024x439.jpg",1024,439,true],"fp-large":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux--1200x514.jpg",1200,514,true],"fp-xlarge":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",1400,600,false],"menu-24x24":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",24,10,false],"menu-36x36":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",36,15,false],"menu-48x48":["https:\/\/labeauairsol.ca\/wp-content\/uploads\/2022\/07\/Bandeaux-.jpg",48,21,false]},"uagb_author_info":{"display_name":"\u00c8ve-Lyne Ducharme","author_link":"https:\/\/labeauairsol.ca\/en\/author\/evelyne-ducharme\/"},"uagb_comment_info":0,"uagb_excerpt":"Here you will find the sampling procedure according to the type of sample to be taken: Mold (surface) Iron ochre Asbestos and vermiculite MOLD (SURFACE) Surface sampling is used to confirm the presence of mold growth on a surface and to identify its type. This is done with clear, transparent adhesive tape. Rate ? :&hellip;","_links":{"self":[{"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/pages\/2011","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/comments?post=2011"}],"version-history":[{"count":0,"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/pages\/2011\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/media\/1911"}],"wp:attachment":[{"href":"https:\/\/labeauairsol.ca\/en\/wp-json\/wp\/v2\/media?parent=2011"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}